|
Perform technical and specialized work of a skilled nature in connection with electrical and electronic systems, communication systems, instrument and control systems, equipment interlocks, computers, annunciator systems and records. Perform analytical and test work in connection with equipment testing, chemical analyses, engineering studies and calculations related to the operating efficiency of power plant equipment, and assist engineers in performing other technical services.
Locate and repair defects in control systems involving electrical, electronic, mechanical, pneumatic or hydraulic components, using wiring diagrams, schematic diagrams, logic diagrams or control diagrams, along with an extensive knowledge of process control.
Inspect, adjust, repair and calibrate electrical relays utilizing single-element sensing devices according to established settings and performance standards.
Install, calibrate and maintain single-element control systems and multiple-element control systems.
Inspect the various component parts of instrument and control systems; make adjustments or replacements to remedy faults in those not functioning properly.
Perform necessary functions to place in or remove from service, instrument and control systems undergoing study, tests or adjustments.
Dismantle, overhaul, reassemble and install electrical equipment in the performance of duties such as placing and removing protective grounds in accordance with clearance orders or switching instructions; install and fit brushes on motors and generators; perform repair work on motors and generators, such as patch damaged insulation, re-wedge or re-lash coils and replace bearings; locate and correct trouble on power circuits for plant equipment such as pulverizers, fans and pumps, using test equipment necessary; install and maintain plant lighting circuits; install conduit; pull and splice cable. Inspect switchgear, transformers, circuit breakers and disconnects for conditions such as temperature, oil level, nitrogen, pressure, loose or damaged connections; make necessary adjustment and repairs.
Diagnose trouble and maintain electrical equipment in the performance of duties such as inspect and repair faults on transformers, auxiliary and protective relays, circuit breakers, switchgear, disconnects, conveyors, motors, generators; make calculations of power and power factor for three-phase circuits; analyze circuits by use of prints or special instruments such as voltage or circuit tester; correct circuit unbalance; install, repair and relocate switchboard control panels and wiring; make and terminate cable connections. Make electrical circuit breaker trip checks to determine operating performance of power distribution system. Place and remove protective grounds in accordance with clearance orders or switching instructions.
Perform mathematical calculations in accordance with established procedures such as those required in analyzing three-phase AC circuits.
Compile and record data relating to tests and investigations and prepare graphs, curves and reports.
Use prints and instruments to locate trouble and make adjustments in equipment such as telemetering, television, communications systems, generator excitation control equipment an dturbo-generator electrohydraulic control systems.
Calibrate and maintain scales on conveyors, rail, roadways, etc. Assist in the performance of weight of material test of the scales as directed.
Assist in making layouts for installation of equipment, new construction and remodeling of buildings; check projects for compliance with standards and specifications.
Assist others in preparing necessary data for engineering procedures, specifications, contracts, bills of material and requisitions for the installation, maintenance and operation of equipment.
Make electrical circuit breaker trip checks and electrical system interlock checks associated with plant electrical control and distribution systems, to determine operating performance of such control equipment.
Set up and connect testing devices used in tests on equipment such as boilers, turbines, generators, motors and other power plant equipment; perform or assist others in the performance of such tests.
Inspect boilers, turbines, generators and other power plant equipment make working sketches for repairs and prepare inspection and maintenance reports.
Conduct voltage surveys and make calculations for DC and single-phase AC circuits as required in the performance of these duties.
Operate and maintain equipment necessary to obtain temperatures, pressures, and flows to obtain accuracy required; analyze data and calculate test results, applying general knowledge of fluid flow and thermodynamics, using available handbooks, manuals and associated referenced material.
Use prints and instruments to locate trouble and make adjustments and repair equipment such as telemetering, television and communication systems.
Operate small machine tools in the course of performing job functions.
Assist in installing, connecting test equipment, and making tests on boilers, turbines, generators and other power plant equipment; maintain test equipment.
Obtain permits and determine that equipment to be worked on has been properly cleared and tagged.
Operate automotive equipment and its associated equipment and perform duties incidental to the operation of such equipment.
Prepare and maintain records as required.
Maintain tools, equipment and work areas in a clean and orderly condition.
Perform duties in accordance with Company's safety rules, all applicable environmental and safety rules and regulations, operating regulations and practices and report unsafe conditions and practices.
Train for and carry out assignments in fire fighting, first aid, CPR and other emergency response programs as required.
Assist employees as required.
Assist in the training of other employees.
Report irregularities and abnormal conditions to the appropriate supervision.
Perform similar or less skilled work as assigned. Minimum Requirements Must have performed the duties, and maintained all the appropriate qualifications of the preceding Electrician jobs, and must be able to pass an examination and/or demonstrations as determined by the Company and in addition:
High School Diploma or equivalent with appropriate level of vocational training and/or four years job related experience. Associate degree in technical or scientific field preferred.
Journey level Requirements
Should have 6,000 hours of power plant experience or equivalent.
Must have sufficient experience in the use of power plant instrumentation to have a working knowledge of process control.
Must have the working knowledge and skill needed to test, repair, calibrate and maintain electrical and electronic equipment associated with generating stations.
Must be able to perform necessary engineering calculations for test results, reports, performance and records.
Must be able to read, interpret and work from moderately complex prints and specifications.
Must have a working knowledge of equipment and clearance procedures, and the rules, safety practices and procedures applicable to the work.
Must be able to lead and direct other employees and obtain cooperation and satisfactory work results.
Must possess the appropriate State driver's license.
Must obtain and maintain all necessary certifications and licenses as required.
Must have demonstrated the ability to physically and mentally perform work in all areas and heights required.
Respond to callouts to maintain and support business operational needs and schedules.
Successful completion of the Power Plant Maintenance Selection System (MASS) test is required for this position. a review of Employment Testing Information, Test-Taking Tips, and the MASS Practice Test may be helpful. A link to these materials may be found at AEP.com Careers by selecting Employment testing.
|
